This tool is temporarily unavailable. Check back soon.
Incorrect code — try again.
SCDOT · Form 400.02
Roller Pattern
Find the break · set the pattern · target density
› Field Record
Roller Pattern
– - -
Passes at peak density per roller
Established Target Density
Twelve random readings. Drops the single highest & lowest, then averages the remaining 10 — same as the field sheet.
—
TARGET DENSITY
Enter 12 readings
› Job Info (Form 400.11)
Job Setup
Number of shots = Lot Length ÷ Feet per Shot (rounded up). Each shot's station & offset come from the next unused pair of numbers in your chosen column, read top to bottom. If a lot needs more shots than a column holds (5 pairs), the tool rolls into the next column automatically.
Set Lane / ID above (e.g. "Left"), then use Add Another Lane instead of Generate — it adds these shots to the same form rather than starting over.
› Job Info (Form 400.09)
Job Setup
Number of cores = Lot Length ÷ Feet per Core (rounded up). Each core's station & offset come from the next unused pair of numbers in your chosen column, read top to bottom — same random-number method as the gauge shots.
Set Lane / ID above (e.g. "Left"), then use Add Another Lane instead of Generate — it adds these cores to the same form rather than starting over.
› Job Info (Form 400.04)
› Work Performed & Equipment
› Temperatures
Ambient Air — Time
Ambient Air — Temp (°F)
Mat Temperature (°F) — row 1
Mat Temperature (°F) — row 2
Temp. of Mix as Loaded (°F) — row 1
Temp. of Mix as Loaded (°F) — row 2
› Mixture Usage & Additional Info
Add Test Observation
Logged Tests
No tests logged yet — add one above.
Target (optional)
Application Rate = (Tons × 2000) ÷ (Length × Width ÷ 9). Set a target to flag each entry pass/fail — leave it blank to just track rate with no pass/fail check.